Pollinator Hotels

cute pollinator hotel
This pollinator hotel’s “rooms” are made of both bamboo lengths and holes drilled into wood.

While some may run for the hills when anything with a stinger flies by, gardeners know that it might be a helpful pollinator. Having pollinators like bees and wasps set up their home right in your garden can be great for your plants, and are often quite harmless when left alone. And while you can’t tell a bee where to nest, you can provide pollinators with an ideal structure should they decide to move in—a pollinator hotel.

Your Resident Pollinators

Solitary bees and wasps are likely to take up residence in your pollinator hotel not long after you place it outside. While honey bees get most of the pollination buzz, solitary bees and wasps do a lot of the work in the garden, and some even take care of pests too.

Some of the bees you might find in your hotel include leafcutter bees (Megachile spp.), carpenter bees (Xylocopa spp.), and orchard mason bees (Osmia spp.). These solitary bees are not aggressive and don’t typically bother humans. You may notice the work of leafcutter bees in your garden; they cut circular sections out of a plant’s leaves and then use the pieces to build nests. 

Solitary wasps may also be attracted to your pollinator hotel. As with solitary bees, these wasps are generally less aggressive than their group-dwelling counterparts. Potter wasps (Eumenes fraternus ) and red and black mason wasps (Pachodynerus erynnis) are some of the common wasp residents of pollinator hotels. While people may be wary of the sting, these flying pollinators are far more likely to lend a hand in the garden than sting. Many solitary wasps will help keep the population of caterpillars in your landscape in check.

Building Your Hotel

There are many ways to create a great little hotel for native pollinators. You can create your hotel with some affordable supplies, some of which you may already have around your house.

Bundling the hollow stems of bamboo together is an easy way to make a pollinator hotel. You can fill any number of containers you might have around your house with bamboo: a plastic tumbler, ceramic flower pot, or an old coffee can. Be sure the bamboo pieces are sealed at the back end. Some types of bamboo have nodes that close off sections to form their own seals. You can also use plaster to seal off the cut of bamboo if it is not naturally sealed. Be sure to vary the lengths of bamboo. Bees are visual navigators and it will help them remember which bamboo piece is home if the rods aren’t all identical.

Another way to make a nesting area for native bees is to take a piece of wood and drill holes into it. Use drill bits of various sizes (between 1/8 inch and 1/2 inch) and drill to various depths (between 3 and 8 inches). Make sure your holes don’t go all the way through the wood. It’s best to use smaller pieces of wood for your pollinator hotel so that they are easy to change out regularly.

In fact, any hotel materials should be changed out every 2 to 3 years to help prevent the spread of parasites and disease. With single pieces of bamboo this is pretty easy to do; simply discard used pieces after checking to be sure they aren’t currently inhabited.

While it is unlikely a whole piece of wood will ever be completely uninhabited, with a smaller piece, it will be easier to keep keep track of the holes in which bees are living. As you watch your wood hotel, see which holes bees and wasps seem to be using. As you notice a hole is unused, go ahead and seal that hole off, continuing until you have no more unsealed holes in the block. You can also gently encourage your bees to go nest elsewhere (see sidebar on how).

wasp on partridge pea blossom
Pollinator wasp visiting a partridge pea blossom.

Remember that bees use visual cues to navigate and find their way back to their nesting site. To help with navigation you can paint simple designs in different colors on your hotel. And keep the structure small; it is much easier for a bee to find their way back to their room when it’s one of fifty and not five hundred.

It’s also a good idea to build some sort of a roof over your hotel to help protect it from the elements. This can be as simple as affixing a piece of wood to the top with a slight overhang.

Place your hotel in an area where it will get some sunlight and shade, with protection from the elements. The “V” of a tree or the windowsill of an east- or south-facing window are ideal locations.

Within just a few weeks you may see pollinators starting to nest in your little hotel.

Remember, if you are building a pollinator hotel it’s best to stop using insecticides in the area or be very selective of the types of insecticides used in your landscape and when you apply them. It’s a poor innkeeper that poisons his guests!

For more information on attracting pollinators to your landscape as permanent residents, contact your county Extension office.

Our thanks to Dr. Cory Stanley-Stahr with the UF Honey Bee Research and Extension Lab for her guidance on this article.

UF/IFAS Publications

Sidebar: Encouraging your pollinator residents to leave an old hotel

Hotels should be changed out every 2 to 3 years to help prevent the spread of parasites and disease. With a single wooden structure, you may have to gently encourage your guests to leave. The easiest way to do this is by placing the nesting material in a completely dark container. On the underside of the container drill a hole large enough for a bee to exit through. Leave the box on a flat surface with the hole hanging over the edge.

Dark container with hole in bottom
Covering your old hotel with a dark container will encourage the pollinators to leave for the new nesting site.

Your resident pollinator will fly down towards the light and out of the box leaving you free to discard the nesting block and replace it with a fresh new one. This method works because bees and wasps will not fly up into a hole on the underside of a box to reinter the nesting area.