Renovating Your Florida Lawn
In the spring, many homeowners begin to think about sprucing up their lawns. Renovation is one way to improve your existing grass without completely removing it and starting over.
Before you start your renovation, consider why your lawn isn't currently thriving. If you don't have the right type of grass for the site conditions, then your grass may suffer again.
Start your renovation by identifying problem areas of your lawn and removing dead or declining patches of turf. Next, use plugs, sprigs, or sod to fill in the holes. Water and fertilize your lawn according to UF/IFAS Extension recommendations, and before you know it, the renovated areas will blend in perfectly with the rest of your lawn.
Repairing the Lawn
Sometimes it's more than just sprucing up; when there are dead areas in your lawn, it's easy to repair them yourself.
Before doing anything, try to determine what killed these areas. Check your irrigation system for missed or overwatered areas, and look for other causes like insects or disease.
To repair patches of turf, you'll need to use either plugs or sod. Plugging is the planting of two- to four-inch circular or block-shaped pieces of sod at six- to twelve-inch intervals. Plugs can be purchased from a garden center or cut from pieces of sod. To fill bare patches immediately, use sod.
Keep your soil moist until the new patches of grass are firmly established, and begin mowing as needed. Wait 30 to 60 days after planting to fertilize your new plugs or sod.
- Caring for Flooded Lawns (PDF)
- Lawn Problems: Dead or Dying Areas in the Lawn (PDF)
- Repairing Lawn Areas (PDF)
Also on Gardening in a Minute